Actions:
Start click> Hover to, Microsoft Test Manager, click> Hover to,Test, click> Hover to, a testin the left window, click > Hover to,a test in the right hand window, click one > Hover to, Run above , click>the Test Runner opens > Hover to, Start click>
Not that the Test Runner does not leave the Initializing state. I have to Kill the app to get it to stop.
I get a message that a Unhanded Exception occurred and the application closes.
It then reopens a couple of seconds later
SC VMM 2012 with SP1 and CU2.
I've added VMware vCenter 5.1 server. It is displayed in VMM console. However, the console displays that it has 0 managed hosts and 0 managed VMs.
Status of vCenter server is "Responding", the account used to communicate with it is valid and has full administrative rights to the server.
What could be wrong?
Hi All,
I'm using System Center 2012 Virtual Machine Manager SP1.
I have successfully added a number of HyperV and VMware hosts and can see all the VM's on these hosts.
The problem I'm having is when attempting to open a VMware VM via the "Connect via Console" option.
I get a message advising that an ActiveX plugin is missing, and asking if I want to install it.
When I say yes to this, my default browser opens and attempts to download "vmware-vmrc-win32-x86.exe" from my vCenter Server.
It is unsuccessful in this attempt as the path it's attempting to download from is invalid.
I managed to download the plug in from my local machine (i.e. the PC that I'm running VMM Console) via the folllowing URL:
http://localhost:9090/vsphere-client/vmrc/vmware-vmrc-win32-x86.exe
The plugin has been successfully installed into both IE and Firefox, but I continually get the message to say that the ActiveX plugin is missing when I attempt to "connect via console".
Can anyone help me please?
Thanks,
Bob
Hi,
I am trying to add ESX hosts to my VMM 2012 SP1, but while doing so, the VMM service crashes. In the eventlog, I get this:
Fault bucket , type 0
Event Name: VMM20
Response: Not available
Cab Id: 0
Problem signature:
P1: vmmservice
P2: 3.1.6011.0
P3: VMWareImplementation
P4: 3.1.6011.0
P5: M.C.V.VmwVMService.PopulateDistributedNetworkingData
P6: System.NullReferenceException
P7: b1fa
P8:
P9:
P10:
Attached files:
%TEMP%\SCVMM.047fed0a-1412-48e4-b6ab-68e1acc7be7f\report.txt
These files may be available here:
Analysis symbol:
Rechecking for solution: 0
Report Id: 0b535d1f-6550-11e2-93f8-68b599ca3c1c
Report Status: 262144
Hashed bucket:
I have found this KB http://support.microsoft.com/kb/2709961/EN-USand it fits our environment perfectly. Only problem is that it does not solve our problem.
The only to get VMM running again is to uninstall and reinstall VMM with a new database.
Thanks in advance!
/Michael
Hi
I am attempting to creata VM on ESX from within VMM, when I go through the Create Virtual Machine Wizard I get No connected sotrage device could be identified that satisfies all requirements.
I'm attempting to use the storage which is already addressed within the ESX Host.
If i check the properties of the host from within Fabric, and go to Storage the Disk is there, but it says 500.00 GB (0 GB available)
Whats going on here? is using SCVMM to create VM's in this way supported?
Hi Everyone,
I am trying to convert a physical server call Account to a virtual server. I am using Virtual Machine Manager 2012 SP1 on my another server which is 2012 call Apps02. Whenever I try to convert, it stops halfway and it gives me Error (2912). It says Element not found (0x80070490) and recommended action to check WS-Management service is installed and running on server Apps02. However, I have checked that the service is running both on Account and Apps02 server. I have even tried restarting the service. Worst thing, when I try again the second time, my account gets locked and I get a message saying Access has been denied while contacting the server. I unlocked the account and try again but same thing happen.
Need help desperately! Thanks!
Hi All,
I Have windows 7 operating system, in that windows 7 i installed VM ware(in that VM ware i installed windows server 2012 OS).
Now i want to copy some files from windows 7 to VM ware.
I tried but paste button is disabled.
After that i enabled Drag and drop and copy and paste options under VM ware Settings but still showing the same(Paste button is disabled)
Thanks in advance.
Actions:
Start click> Hover to, Microsoft Test Manager, click>Hover to,Test, click > Hover to, Do Exploratory Testing, click > Hover to,Work Item(s), click one > Hover to,Explore, click>CRASH !!! CRASH !!! CRASH !!! CRASH !!!
The Debugger launches>
TypeLoadException was not handled
Method 'add_FailedToReachController'
in type 'Microsoft.VisualStudio.TestTools.Agent.AgentProcessManager'
from assembly 'Microsoft.VisualStudio.QualityTools.AgentProcessManager,
Version=11.0.0.0, Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a' does not have an implementation.
Whats Wrong here?
Hi
I have already an existing vCenter Server into my SCVMM environment. The problem is " I am unable to remove it from SCVMM server because vCenter server doesn't exist now".
When I try to add a new vCenter Server, it gives me an error that old vCenter Server is not responding. What should I do to solve this issue?
Also how many vCenter Servers, I can add into a single SCVMM?
Any help would be really appreciated.
Thanks in advance.
Abhinav | MCTS-Server Virtualization
Good Afternoon,
Having great difficulty adding in a vCentre server into VMM, i get the below error message:
"Could not retrieve a certificate from server because of the error: the remote server returned error (407) proxy authentication requiried."
I have looked through carious forums and have completed all that has been suggested, this includes:
1. Making sure that both the VMM server and the vCentre server have access to the internet & each other, making sure both are proxy autneticated.
2. Installed the self assigned certificate in the trusted peoples directory that the vCentre server provides when visiting the web address.
3. Made sure that the 'Run As' account has relevant domain permissions to do the vCentre server.
Any help would be greatly appreciated.
Thanks
Hassan.
Hi,
I am in the process of creating SCVMM environment in MTM VS 2012. Here is the software deployment architecture.
TFS 2012
SCVMM 2012 sp1
VMWare ESX host version 5.1 is added to SCVMM 2012 sp1. While creating the environment using Stored virutal machine, i get below error.
Error (22803)
Cannot place virtual machine Lab_7b5c5cf4-6559-44c8-a90f-28759e8ec6dd in cloud VSLM_0e3ba228-a059-46be-aa41-2f5cf0f4b96e because no hosts are available on this cloud.
Recommended Action
Add one or more hosts into host groups which are in this cloud's scope.
Error (23776)
The VM [Lab_7b5c5cf4-6559-44c8-a90f-28759e8ec6dd] could not be placed on cloud [VSLM_0e3ba228-a059-46be-aa41-2f5cf0f4b96e] due to the following issues:
(2 / 2) 23767
A virtual machine with name Lab_7b5c5cf4-6559-44c8-a90f-28759e8ec6dd cannot be deployed to host xxxxx(esx host) because the host virtualization platform does not support use of the character '_' in the virtual machine name.
Recommended Action
Ensure that there are no operations occurring on virtual machine Lab_7b5c5cf4-6559-44c8-a90f-28759e8ec6dd and attempt placement again.
Mayank Goswami
VMM 2012 SP1 installed on Server 2012 machine
VMM was integrated with a vSphere environment and was working correctly yesterday
As part of a preparation to migrate VMWare machines to Hyper-V, we ran the MAP tool yesterday on a Windows 7 workstation to view virtual machine migration readiness reports
MAP tool could not connect into VMWare environment, no data returned from inventory
Look into VMM server today, and the vCenter server shows the following status
The password on the run as account has not changed, the account is not locked out, it can successfully login to vSphere, and is listed as an admin in vSphere. Again, everything worked yesterday, the MAP tool was the only task performed, which failed to collect data, and today we have no VMWare resources in VMM.
Any attempts to delete the vSphere connection, or change credentials to a different run as account result in the following error:
Cannot complete login due to an incorrect user name or password. (InvalidLogin). (Error ID: 2951, Detailed Error: )
We have also tried to remove any existing connections using the VMM PowerShell Command Shell, run as administrator, using the following command:
Get-SCVirtualizationManager | Remove-SCVirtualizationManager -RunAsynchronously
This command returns a similar error to what I have shown above in the first screenshot:
Remove-SCVirtualizationManager : Virtual Machine Manager cannot complete the VirtualCenter action on server server.fqdn.com because of theHi,
I have just configured a VMM 2012 R2 installation to manage a VMware cluster. I can deploy a new VM from VMM just fine.
Then I imported a VMware template and now I try to deploy it to the cluster. When selecting placement it gives me the following error,
The virtualization software on host esxi3.domain.int does not support setting NumLock.
Specify a host that is running Windows Hyper-V and then try the operation again.
ID: 10638
It is always the host number 3 out of 8 hosts that gives the error.
We are using VMware ESXi 5.1 and vCenter 5.5
Best Regards
Olof
My issue is.....SCVMM does not "see" any of the SAN datastores as shared.
I am manging a vSphere 4.0 infrastructure with 2 ESX 4.0 hosts
5 shared SAN datasores connected to the esx hosts with FC
In the SCVMM console the luns show up but not as valid migration paths
Further I have tried importing templates from this shared storage and it fails
When I try to create a VM using SCVMM the only storage path offered is the local storage on an ESX host
Do I needto add the "run as" account to the esx hosts?
I'm really frustrated with this "Integration" of SCVMM and vCenter
Do the SANS need to be added to the Fabric as storage? If so How?
Hi,
I have Two ESXi host and 6 VMs, I have to migrate to Hyper-v 2012R2 using SCVMM2012 Sp1.
My physical Network contain multiple VLANs (cisoc switchs). ESXI hosts were in VLAN 15, using 192.168.15.0/24 .
My Guests were in second VLAN 25, using 192.168.25.0/24 for IP Addressing
The process:
Questions:
Thanks
Lourh
Hi All,
i am facing the below error while adding VCenter Server in SCVMM 2012 SP1:
Thanks Rahul$
Hello ,
when i am trying to convert v2v : vmware to hyper v it is showing
Error (10406)
Virtual Machine Manager cannot contact muzkwdresxi01.domain.com because the credentials for domain.almuzaini.com are missing.
Recommended Action
Provide credentials for muzkwdresxi01.domain.com and then try the operation again.
I want to know what is the issue .
Regards
Hello guys!
Im trying to migrate my Vmware v-Sphere 5.1 environment to my cluster Hyper-V 2012 R2. It is about 2000 VMs.
I'm using SC VMM 2012 R2 to perfom the VMs migration. I had no issues during the whole process. During the test phases, I created a VM Win 2012R2 with fixed HD containing 40GB of data. This VM took about 1 hour to migrate from VMWare to Hyper-V. My question is: Is there any option to reduce this time? Is this time acceptable? Both source and destionation servers are using SSD disks and network teaming giving a result of 2Gbps on the NIC.
Another question: Can I migrate more than 1 Vm per time using VMM? If so, what is the limitation?
Thanks for the help!
Leandro Soares
Leandro Soares - MCP/MCSA/MCTS
Hi,
We are working with a UI Add-in for SCVMM 2012 where we should support both Hyper-v and ESX hosts. When added the ESX host and presented few LUNs (out of band operation) from the HP 3PAR array, we are unable to view the Storage details like Storage Logical unit, Storage Pool and Storage Array when we select the same LUN in the Classification and Pools section of SCVMM. We tried even with the PowerShell, but couldn’t help. Can you please guide us, how we can get the storage details of a LUN presented to the ESX host which is added in the SCVMM 2012.
Thanking you.
Regards,
Hari
Hi,
We are working with a UI Add-in for SCVMM 2012 where we should support both Hyper-v and ESX hosts. When added the ESX host and presented few LUNs (out of band operation) from the HP 3PAR array, we are unable to view the Storage details like Storage Logical unit, Storage Pool and Storage Array when we select the same LUN in the Classification and Pools section of SCVMM. We tried even with the PowerShell, but couldn’t help. Can you please guide us, how we can get the storage details of a LUN presented to the ESX host which is added in the SCVMM 2012.
Thanking you.
Regards,
Hari